Changes to Step #1
Edit by Hybrid Racing —
Edit approved by Hybrid Racing
- Before
- After
- Unchanged
Step Lines
| + | [title] Remove engine under panel |
|---|---|
| + | [* 1] Begin your installation by unbolting the rear portion of the underbody tray. You do not need to remove the entire plastic tray, but you must remove enough bolts so the panel can be pulled out of the way. |
| + | [* 1] Using a panel removal tool, remove the clips that hold the inner wheel well panel in place. There is one clip in each wheel well. |
| + | [* 1] Once you have removed all the bolts and clips, you should be able to pull the undertray downward to gain access to the exhaust system front pipe. |
Image 1
No previous image
Added
Image 2
No previous image
Added
Image 3
No previous image
Added