Changes to Step #3

Edit by Hybrid Racing —

Edit approved by Hybrid Racing

Before
After
Unchanged

Step Lines

[title] Throttle Body Install
[* 1] Check orientation of ZDX pattern thermal insulating gasket. Shown correctly in first picture.
-[* 1] Place throttle body and ZDX gasket on adapter. Fasten to adapter using x4 ***M8x1.25 50mm bolts*** and 4x ***Split Lock Washers***. Tighten to 16 lb-ft per Acura ZDX Service Manual
+[* 1] Place throttle body and ZDX gasket on adapter. Fasten to adapter using x4 ***M8x1.25 50mm bolts*** and 4x ***Split Lock Washers***. Tighten to 16 lb-ft using 6mm Allen/Hex drive.