Changes to Step #1

Edit by Hybrid Racing —

Edit approved by Hybrid Racing

Before
After
Unchanged

Step Lines

[title] Preparation
-[* 1] Remove existing throttle body and adapters. The Hybrid Racing adapter and gaskets are only parts needed to convert from PRB style manifold to ZDX throttle body.
- [* 10] This install was completed using Skunk 2 Ultra Street Manifold PN: 307-05-0600
+[* 1] Remove existing throttle body and adapters. The Hybrid Racing adapter and gaskets are only parts required to convert from PRB pattern manifold to ZDX throttle body.
+ [* 10] Manifold shown in install is Skunk 2 Ultra Street Manifold PN: 307-05-0600
[* 1] Clean gasket mating surface of intake manifold. Ensure no dirt or oils on surface.