Changes to Step #1
Edit by Hybrid Racing —
Edit approved by Hybrid Racing
- Before
- After
- Unchanged
Step Lines
| + | [title] Preparation |
|---|---|
| + | [* 1] Remove existing throttle body and adapters. The Hybrid Racing adapter and gaskets are only parts required to convert from PRB pattern manifold to ZDX throttle body. |
| + | [* 10] Manifold shown in install is Skunk 2 Ultra Street Manifold PN: 307-05-0600 |
| + | [* 1] Clean gasket mating surface of intake manifold. Ensure no dirt or oils on surface. |
Image 1
No previous image
Added