Changes to Step #1
Edit by Hybrid Racing —
Edit approved by Hybrid Racing
- Before
- After
- Unchanged
Step Lines
| - | [* 1] Insert wisdom here |
|---|---|
| + | [title] Coolant Temp / H20 Sensor |
| + | [* 1] On the Rywire engine harness, there is a connector labeled H20. This normally connects to the gauge cluster temp sensor located on the upper water neck on the Honda K20. |
| + | [* 1] The Hybrid Racing conversion harness has a wire labeled "coolant temp." In order to control the gauge cluster in the EG/DC/EK chassis, you'll need to connect the wire labeled "coolant temp" to pin 6 on the Rywire engine harness. |