Changes to Step #17
Edit by Hybrid Racing —
Edit approved by Hybrid Racing
- Before
- After
- Unchanged
Step Lines
| + | [title] Throw Adjustment |
|---|---|
| + | [* 1] Our shifter has two settings for F/B and L/R movements. They are independently adjustable, meaning you can do whatever combination you prefer. |
| + | [* 10] This is the throw adjustment. Adjust this pin to shorten or lengthen the front/back motion of the shifter. |
| + | [* 6] Position 1 is the default setting. This is the LONGEST setting possible. Approximately 25% shorter than OEM. |
| + | [* 8] Position 2 is the SHORTEST setting possible. This is 50% shorter than OEM. |
| + | [* 11] To adjust the throw, simply push the retaining clip off the backside and loosen the pin with a 12mm wrench. Unscrew the pin, place it in the desired location and retighten. Then install the clip. |
Image 1
No previous image
Added
Image 2
No previous image
Added
Image 3
No previous image
Added