Changes to Step #19
Edit by Hybrid Racing —
Edit approved by Hybrid Racing
- Before
- After
- Unchanged
Step Lines
| [title] Adjust Offset / Shift knob | |
| [* 1] Depending on your car and shifting preference you can adjust the shift knob height and overall position. | |
| [* 1] The offset must either be in the forward position (10 to 2 on a clock) or the rearward position (8 to 4 on a clock). The offset or rod will contact your console if you have it mounted to the side. | |
| [* 9] These shifters DO NOT work in RHD cars. The offset WILL contact the console. If you use this in a RHD you will NOT be able to use the console cover. Please understand you will have to modify your center console if you have a RHD car. We do not recommend that. | |
| + | [* 10] Tighten the offset so that it does not spin. There is no set torque spec. Tighten it until it doesn't move. You may need to use a ratchet and 6mm Allen socket. |