Changes to Step #12
Edit by Hybrid Racing —
Edit approved by Hybrid Racing
- Before
- After
- Unchanged
Step Lines
| - | [* 1] Insert wisdom here. |
|---|---|
| + | [* 1] Now you will need to remove the shifter cables from the shifter. This is a three-part process. |
| + | [* 1] 1: unlock the shifter cable by pushing the tab upwards. |
| + | [* 1] 2: After the cable is unlocked, spin the cable lock to relieve the tension on the cable. |
| + | [* 1] 3: Push the lock back down to hold it in place. |
| + | [* 1] 4: Push the cable back |
| + | [* 1] 5: Pull upward on the cable and it should slide out of the groove in the shifter. |
| + | [* 11] Repeat this process on the other shifter cable. |