Changes to Step #26
Edit by Hybrid Racing —
Edit approved by Hybrid Racing
- Before
- After
- Unchanged
Step Lines
+ | [* 1] Bleed the clutch release system. We suggest using a vacuum bleeder or at least a hand vacuum pump to remove all of the air from the system. |
---|---|
+ | [* 1] Be sure to keep the reservior filled during the entire sequence. |
+ | [* 1] Use the same fluid already installed in your car. Do not mix brake fluids. |
+ | [* 1] After a few minutes of bleeding, the pedal should be firm and actuate the clutch fork completely. This is typically between 1/2" and 1" of travel at the fork. |