Changes to Step #19
Edit by Hybrid Racing —
Edit approved by Hybrid Racing
- Before
- After
- Unchanged
Step Lines
| + | [title] Install Line On CMC |
|---|---|
| [* 1] Install the clutch line on the new CMC and make sure it is clocked correctly. The fitting should be in line with the mounting face. | |
| [* 9] This is done to ensure no contact between the firewall and clutchline. | |
| [* 10] The banjo fitting should have a washer on the top and bottom. | |
| [* 11] Be sure to install the new firewall seal. |