Changes to Step #2
Edit by Hybrid Racing —
Edit approved by Hybrid Racing
- Before
- After
- Unchanged
Step Lines
| + | [title] Bearing Insert |
|---|---|
| + | [* 11] The Hybrid Racing logo should always face UP when installed on the transmission. |
| + | [* 10] The bottom of the bearing insert should sit flat on the transmission. Install the bushing correctly and then install the retaining clip on the top. |
| + | [* 9] If this is installed wrong, it can bend or break the shifter cable as it won't sit flat on the gear selector. |
Image 1
No previous image
Added
Image 2
No previous image
Added
Image 3
No previous image
Added