Changes to Step #6
Edit by Hybrid Racing —
Edit approved by Hybrid Racing
- Before
- After
- Unchanged
Step Lines
| - | [* 1] Insert wisdom here. |
|---|---|
| + | [title] Bushing Insert |
| + | [* 1] The TOP of the bushing contains the Hybrid Racing logo etching. This faces UP. |
| + | [* 1] Install the correct bushing insert and secure it with the included retaining ring. Please refer to step 5 and make sure you use the correct part. |
| + | [* 10] The base of the bearing insert says BOTTOM. This part should sit flat against the transmission. |
| + | [* 9] Failure to install this part correctly can result in a damaged or bent cable core caused by misalignment. |