Changes to Step #2
Edit by Hybrid Racing —
Edit approved by Hybrid Racing
- Before
- After
- Unchanged
Step Lines
| + | [title] Secure Cables |
|---|---|
| [* 4] Use the same technique from step 1 to install the Left/Right cable into the shifter base. | |
| [* 1] Once installed, you may notice that the shifter cable end link's natural state is not aligned with the shifter pin. | |
| [* 5] Align the shifter cable end link by loosening and adjusting the retaining nut. Install the shifter cable and tighten the retaining nut. | |
| [* 1] Use the supplied retaining clip to secure the shifter cable to the shifter. |