Changes to Step #2
Edit by Hybrid Racing —
Edit approved by Hybrid Racing
- Before
- After
- Unchanged
Step Lines
+ | [title] Secure Cables |
---|---|
+ | [* 4] Use the same technique from step 1 to install the Left/Right cable into the shifter base. |
+ | [* 1] Once installed, you may notice that the shifter cable end link's natural state is not aligned with the shifter pin. |
+ | [* 5] Align the shifter cable end link by loosening and adjusting the retaining nut. Install the shifter cable and tighten the retaining nut. |
+ | [* 1] Use the supplied retaining clip to secure the shifter cable to the shifter. |
Image 1
No previous image
Added
Image 2
No previous image
Added
Image 3
No previous image
Added