Changes to this Step
Edit by Hybrid Racing —
Edit approved by Hybrid Racing
- Before
- After
- Unchanged
Step Lines
| + | [title] Install the Hybrid Racing Shifter |
|---|---|
| + | [* 1] Install the Hybrid Racing shifter and line up the shifter cables. |
| + | [* 1] Twist the cable mount and slide it into the shifter. Make sure you align it correctly otherwise the cables will not slide in. |
| + | [* 1] Using the provided bolts and washers bolt the shifter to the chassis with a 5mm Allen wrench |
| + | [* 10] Once the cables are installed on the shifter, you will need to slide the stock cables through the floor grommet. It may take a bit of force but they slide through easy and you can bolt the shifter into place. |
Image 1
No previous image
Added
Image 2
No previous image
Added
Image 3
No previous image
Added