Changes to this Step
Edit by Hybrid Racing —
Edit approved by Hybrid Racing
- Before
- After
- Unchanged
Step Lines
| + | [title] Disconnect Shifter Cables |
|---|---|
| + | [* 9] Remove the cables from the factory shifter. This can be tricky so take one cable at a time. It spins and then slides upwards out of the shifter. |
| + | [* 1] Pull the LH side retaining ring and slide the cable off the pin. |
| + | [* 1] The lower cable retaining ring must be pulled apart and then you can slide the cable end link off the shifter ball. |
Image 1
No previous image
Added
Image 2
No previous image
Added