Changes to Step #3
Edit by Hybrid Racing —
Edit approved by Hybrid Racing
- Before
- After
- Unchanged
Step Lines
| + | [title] Install Thermostat |
|---|---|
| + | [* 1] Thread the supplied hose adatper and make sure it is tight. |
| + | [* 1] You can use a 1 1/2" adjustable wrench, large AN wrench or a pair of adjustable pliers. We show the most common method since these tools are commonly found. |
| + | [* 9] Be sure not to mar the neck if you use pliers. Cover it with a shop towel first. |
| + | [* 10] If you want to run a Honda fan sensor in this product, now is the time to install it. The process is the same. |
Image 1
No previous image
Added
Image 2
No previous image
Added
Image 3
No previous image
Added