Changes to Step #1
Edit by Hybrid Racing —
Edit approved by Hybrid Racing
- Before
- After
- Unchanged
Step Lines
| + | [title] Remove OEM Neck |
|---|---|
| + | [* 1] Begin the installation by removing the factory plastic thermostat neck. |
| + | [* 1] Remove the three 10mm bolts. |
| + | [* 9] Drain all of the coolant out of the system before removing the thermostat. If you haven't, it will leak out once you remove this part. |
Image 1
No previous image
Added
Image 2
No previous image
Added