Changes to Step #1
Edit by Hybrid Racing —
Edit approved by Hybrid Racing
- Before
- After
- Unchanged
Step Lines
- | [* 1] Insert wisdom here. |
---|---|
+ | [title] Determine correct belt size |
+ | [* 11] This guide will show you how to install the Hybrid Racing idler bracket and pulley kit using part number HYB-IDB-01-04, and a corresponding belt. |
+ | [* 10] If you are using one of our belts, begin by measuring your crank pulley to confirm which belt you need. This should be done before ordering. |
+ | [* 1] This guide references a K24A engine that has a 6.5" outer diameter crank pulley. |
+ | [* 1] This means we are using Hybrid Racing serpentine belt part number HYB-BLT-00-04. |
+ | [* 9] Visit our website to determine which belt size is right for your application. We may not have the correct belt size, depending on your crank pulley size. |