Changes to Step #5

Edit by Hybrid Racing —

Edit approved by Hybrid Racing

Before
After
Unchanged

Step Lines

[title] Install Belt
[* 1] If you have picked the right size belt, you can now install it using the OEM tensioner.
-[* 1] Route the belt per the diagam. Use a breaker bar or long handle wrench to move the tensioner out of the way. Slide the belt on the pulleys and release the tensioner.
+[* 1] Route the belt per the diagram. Use a breaker bar or long handle wrench to move the tensioner out of the way. Slide the belt on the pulleys and release the tensioner.
[* 1] The system should operate within the tension markers located on the tensioner.