Changes to Step #1

Edit by Hybrid Racing —

Edit approved by Hybrid Racing

Before
After
Unchanged

Step Lines

-[title] How to meassure for the correct belt size.
+[title] Determine correct belt size.
[* 11] This guide will show you how to install the Hybrid Racing idler bracket and pulley kit using part number HYB-IDB-01-02, and a corresponding belt.
[* 10] If you are using one of our belts, begin by measuring your crank pulley to confirm which belt you need. This should be done before ordering.
[* 1] This guide references a K20A2 engine that has a 5.8" outer diameter crank pulley.
[* 1] This means we are using Hybrid Racing serpentine belt part number HYB-BLT-00-01.
[* 9] Visit our website to determine which belt size is right for your application. We may not have the correct belt size, depending on your crank pulley size.