Changes to Step #1
Edit by Hybrid Racing —
Edit approved by Hybrid Racing
- Before
- After
- Unchanged
Step Lines
| + | [title] HYB-IDB-01-02 |
|---|---|
| + | [* 11] This guide will show you how to install the Hybrid Racing idler bracket and pulley kit using part number HYB-IDB-01-02, and a corresponding belt. |
| + | [* 10] If you are using one of our belts, begin by measuring your crank pulley to confirm which belt you need. This should be done before ordering. |
| + | [* 1] This guide references a K20A2 engine that has a 5.8" outer diameter crank pulley. |
| + | [* 1] This means we are using Hybrid Racing serpentine belt part number HYB-BLT-00-01. |
Image 1
No previous image
Added
Image 2
No previous image
Added
Image 3
No previous image
Added