Changes to Step #11
Edit by Hybrid Racing —
Edit approved by Hybrid Racing
- Before
- After
- Unchanged
Step Lines
| + | [title] Install Pivot Seat |
|---|---|
| [* 1] Pay attention to the reverse lockout notch. This notch should point to your left when you hold it in your hand. | |
| [* 2] With the notch pointing left locate the Shifter Pivot Seat (#8) and slide it down onto the ball. | |
| [* 10] Make sure the center line of the SPS is pointing up, and the reverse notch is pointing to the left. | |
| [* 9] ***If these parts are installed backward, you cannot install the shifter correctly.*** |