Changes to Step #4
Edit by Hybrid Racing —
Edit approved by Hybrid Racing
- Before
- After
- Unchanged
Step Lines
| + | [* 1] Use a flat-tipped screw driver, unclip the dust boot cover by prying outward. There are four clips at each corner. |
|---|---|
| + | [* 2] Pay attention to the arrows on the plastic ring. They are highlighted in red. |
| + | [* 1] Slide the rubber dust boot cover upwards and remove it from the car. Set this aside, as it will be reinstalled later. |
Image 1
No previous image
Added
Image 2
No previous image
Added
Image 3
No previous image
Added