Changes to Step #15
Edit by Hybrid Racing —
Edit approved by Hybrid Racing
- Before
- After
- Unchanged
Step Lines
| + | [title] 2003 Acura CL Type-S Shifter Cable |
|---|---|
| + | [* 10] Remove the retaining pin and use a 12mm wrench to loosen the pin. |
| + | [* 5] Install the smaller pin for the CL Type-S and tighten with a 12mm wrench. |
| + | [* 5] Install the retaining clip. |
| + | [* 1] You can now continue with the installation based on the car you have. |
Image 1
No previous image
Added
Image 2
No previous image
Added
Image 3
No previous image
Added