Changes to Step #16
Edit by Hybrid Racing —
Edit approved by Hybrid Racing
- Before
- After
- Unchanged
Step Lines
| [title] Disconnect Shifter Cables | |
| [* 9] Remove the cables from the factory shifter. This can be tricky so take one cable at a time. It spins and then slides upwards out of the shifter. | |
| [* 1] Pull the LH side retaining ring and slide the cable off the pin. | |
| [* 1] The lower cable retaining ring must be pulled apart and then you can slide the cable end link off the shifter ball. | |
| + | [* 1] Remove the shifter cables from the shifter. If you are changing the shifter, now is the time to remove the shifter from the car. |