Changes to Step #13
Edit by Hybrid Racing —
Edit approved by Hybrid Racing
- Before
- After
- Unchanged
Step Lines
| + | [* 4] Remove the 10mm bolt attaching the bracket for the primary o2 sensor harness and remove the clip to detach the harness from the bracket. |
|---|---|
| + | [* 4] Cut the next clip up that attaches the o2 sensor wire to the firewall. |
| + | [* 10] This will need to be removed to get slack out of the wire for the o2 sensor to reach from the header to the harness. |
Image 1
No previous image
Added
Image 2
No previous image
Added
Image 3
No previous image
Added