Changes to Step #12
Edit by Hybrid Racing —
Edit approved by Hybrid Racing
- Before
- After
- Unchanged
Step Lines
| + | [* 1] Prepare the o2 sensor for removal with penetrating oil. |
|---|---|
| + | [* 1] Remove the primary o2 sensor from the catalytic converter pipe. |
| + | [* 1] Install the o2 sensor in the first port closest to the flange that attaches to the engine. |
| + | [* 10] ''Depending on the mileage of your vehicle, it is recommended to inspect your primary o2 sensor for possible replacement.'' |
Image 1
No previous image
Added
Image 2
No previous image
Added
Image 3
No previous image
Added