Changes to Step #2
Edit by Hybrid Racing —
Edit approved by Hybrid Racing
- Before
- After
- Unchanged
Step Lines
| + | [* 5] Remove the four 10mm bolts that hold the heat shield to the catalytic converter. |
|---|---|
| + | [* 10] Removing the heat shield will ease in the removal of the o2 sensor. |
| + | [* 1] Remove the lower portion of the heat shield, the upper will remain until the o2 sensor has been removed. |
Image 1
No previous image
Added
Image 2
No previous image
Added
Image 3
No previous image
Added