Changes to Step #2
Edit by Hybrid Racing —
Edit approved by Hybrid Racing
- Before
- After
- Unchanged
Step Lines
| - | [* 1] Insert wisdom here. |
|---|---|
| + | [title] Cable to transmission |
| + | [* 1] Install the shifter cable insert that fits your transmission and use the supplied retaining clip to keep it in place. |
| + | [* 9] Install the shifter cable end link to the gear selector and make sure you have the big end of the insert sitting flat against the gear selector. If the retaining clip is on the bottom it can freeze and bend the cable, preventing it from moving. |
| + | [* 1] Install the shifter cable to into the cable bracket, using a spring C clip. |