Changes to Step #22
Edit by Hybrid Racing —
Edit approved by Hybrid Racing
- Before
- After
- Unchanged
Step Lines
| - | [* 1] Insert wisdom here. |
|---|---|
| + | [title] Cable installation |
| + | [* 1] This step may or may not be necessary depending on the direction of your cable end link. |
| + | [* 1] Make sure you spin the cable end link so it aligns correctly with the shifter ball. |
| + | [* 1] Once it is lined correctly, use two wrenches to tighten the lock nut. |
| + | [* 9] ***You must adjust this to prevent the cable from binding inside of the sleeve. You should only spin the end link one turn or less. *** |