Changes to Step #15
Edit by Hybrid Racing —
Edit approved by Hybrid Racing
- Before
- After
- Unchanged
Step Lines
| - | [* 1] Insert wisdom here. |
|---|---|
| + | [title] Floor seal removal |
| + | [* 1] You will need to remove the OEM floor seal from your stock cables and transfer it to the HR cables. |
| + | [* 1] We suggest drawing a line on the center of each cable and use a razor blade to slice through it. |
| + | [* 1] Be sure to cut only one line since the new cables will fit directly into the opening. |
| + | [* 1] Lay the cables next to each other and orient them the same way. Make sure the cable bracket goes on in the same location as the OEM cables to make installing them easier. |
| + | [* 1] If you don't get it 100% right, that's ok since you should be able to slide them slightly once the cables are back in the car. |