Skip to main content

Changes to Step #7

Edit by Hybrid Racing

Edit approved by Hybrid Racing

Before
After
Unchanged

Step Lines

[title] Reverse Gear Detent Spring
[* 1] There is only one spring that affects the reverse gear. It's located on the lower right-hand section of the case, above the (2nd) 1/2 spring.
[* 1] Remove this spring and install the HR spring to increase the sharpness of the reverse gear.
[* 1] This is an optional step, typically this spring is not changed but can be if desired.
[* 9] Be sure to use a dab of Hondabond on the threads to prevent a fluid leak.
+[* 1] Use a torque wrench and tighten to 16 lbf-ft (29 N-m / 3.0 kgf-m). Do NOT over tighten as the bolts will break.