Changes to Step #7
Edit by Hybrid Racing —
Edit approved by Hybrid Racing
- Before
- After
- Unchanged
Step Lines
| + | [title] Reverse Gear Detent Spring |
|---|---|
| + | [* 1] There is only one spring that affects the reverse gear. It's located on the lower right-hand section of the case, above the (2nd) 1/2 spring. |
| + | [* 1] Remove this spring and install the HR spring to increase the sharpness of the reverse gear. |
| + | [* 1] This is an optional step, typically this spring is not changed but can be if desired. |
| + | [* 9] Be sure to use a dab of Hondabond on the threads to prevent a fluid leak. |
Image 1
No previous image
Added