Changes to Step #6
Edit by Hybrid Racing —
Edit approved by Hybrid Racing
- Before
- After
- Unchanged
Step Lines
[title] 5/6 Detent Spring | |
[* 8] There is only one detent spring for the 5/6 gear gate. This is marked in pink. | |
[* 1] Install the HR spring in this location to increase the stiffness in the 5/6 gear change. | |
[* 1] Be sure to use a dab of Hondabond when reinstalling the detent bolt. | |
+ | [* 1] Use a torque wrench and tighten to 16 lbf-ft (29 N-m / 3.0 kgf-m). Do NOT over tighten as the bolts will break. |