Skip to main content

Changes to Step #1

Edit by Hybrid Racing

Edit approved by Hybrid Racing

Before
After
Unchanged

Step Lines

-[* 1] Insert wisdom here.
+[title] Fuel Pump Parts
+[* 1] To begin, you will need to remove the fuel pump cage from the tank of the car. Depending on the type of car, this process typically requires you to remove the rear lower seat, access cover and wiring harness. Then remove the fuel lines and unbolt the fuel pump cage and pull it upwards out of the tank.
+[* 1] Our image represents a completely stock fuel pump assembly. This exact part comes from the 94-01 Integra DC2. The EG and EK fuel pump setups are very similar.
+[* 1] Included in the Hybrid Racing fuel pump kit, you will receive a new fuel pump, along with a filter element, replacement hose, clamps and wire harness with crimps.
+[* 10] You may NOT use all of the included parts. We include them in case your factory parts are old or damaged. If you wiring, hose and clamps are in good shape, you do NOT need to change them. Our fuel pump is 100% compatible with all of the factory Honda parts.