Skip to main content

Changes to Step #5

Edit by Hybrid Racing

Edit approved by Hybrid Racing

Before
After
Unchanged

Step Lines

+[* 2] Upload your calibration to your Flashpro by selecting the Flashpro button on the Flashpro window.
+[* 1] Unplug your Flashpro from your computer.
+[* 1] Flash the calibration onto your vehicle.
+[* 9] ***Plug the Flashpro into the OBD2 port with the ignition switched on but the engine is not running. Hold down the program button for 3 seconds and then release. The program light will flash for 1 minute and 30 seconds while the calibration is uploaded. The light will stop flashing once the calibration is completely uploaded.***
+[* 1] You have successfully installed your Flashpro and uploaded a basemap calibration!

Image 1

No previous image

New image

Added