Changes to Step #19
Edit by David Cordell —
Edit approved by David Cordell
- Before
- After
- Unchanged
Step Lines
- | [* 1] Insert wisdom here. |
---|---|
+ | [title] Finishing |
+ | [* 1] Reinstall the console by following these steps in reverse. |
+ | [* 1] Our shifter works with the factory boot and console. Depending on the offset location and rod height the factory boot may be too short to use a boot collar. |
+ | [* 1] If you prefer removing the shift boot, simple remove the 4 mounting screws and it will expose the shifter through the console. |