Changes to Step #14
Edit by David Cordell —
Edit approved by David Cordell
- Before
- After
- Unchanged
Step Lines
| [title] HR Shifter Installation | |
| [* 1] Once the shifter has been removed clean the surrounding area and then place your Hybrid Racing shifter in place. | |
| [* 1] Install the shifter cables on the HR shifter. You may need to push the cables forward into the floor seal. That is normal. | |
| [* 1] Re-install the shifter cable C clip. | |
| + | [* 10] Use the supplied zip ties and secure the wiring harness to the shifter base. BE SURE THEY ARE NOT IN THE WAY OF THE SHIFTER ARMS. |