Changes to Step #8
Edit by David Cordell —
Edit approved by David Cordell
- Before
- After
- Unchanged
Step Lines
| + | [title] Console Removal |
|---|---|
| + | [* 2] Remove the e-brake boot cover from the console. There is a small metal ring hooked around the top section. |
| + | [* 3] Locate and disconnect the 12v socket connector on the front lower section of the arm rest. |
| + | [* 4] Remove the wire harness clip. |
Image 1
No previous image
Added
Image 2
No previous image
Added