Changes to Step #7
Edit by David Cordell —
Edit approved by David Cordell
- Before
- After
- Unchanged
Step Lines
[title] Console Removal | |
- | [* 1] Mounted above the shifter is the stereo amp. There are (x2) 10mm |
+ | [* 1] Mounted above the shifter is the stereo amp. There are (x2) 10mm nuts that hold it in place. Circled in orange, remove these two nuts and lift the amp out of the way. |
[* 1] There are (x2) Phillip screws holding the front section of the console to the lower dash. They are hard to see and remove, but must be removed before the console can separate. The red arrows in images 2 and 3 identify their location. |