Changes to Step #2
Edit by David Cordell —
Edit approved by David Cordell
- Before
- After
- Unchanged
Step Lines
| + | [title] Cup Holder Removal |
|---|---|
| + | [* 1] Remove the cup holders and console trim by grabbing the front section (near the shift boot) and pulling upwards. Start near the pockets and work towards the arm rest. |
| + | [* 1] Open the cup holder lid and grab the inner corners. You may need to use a plastic pry tool if your console has never been pulled apart. It can be tough the first time but just take your time and pull upwards. There are only clips that hold this part in place. |
| + | [* 1] Once it pops free, rotate it forward to expose the seat heater wiring. |
Image 1
No previous image
Added
Image 2
No previous image
Added
Image 3
No previous image
Added