Changes to Step #2
Edit by David Cordell —
Edit approved by David Cordell
- Before
- After
- Unchanged
Step Lines
| + | [title] Detent Spring Removal |
|---|---|
| [* 2] Remove each of the three gear selector detent springs. On the K-Series transmission, they are located on the top of the trans case. | |
| [* 5] Once you remove the detent spring housing, remove it slowly making sure no dirt or debris fall into the case. | |
| [* 3] Be sure to keep the washer in place and do not lose it. | |
| [* 4] Swap the stock, silver spring for the longer black HR detent spring. The ball detent should remain inside of the transmission case. | |
| + | [* 10] Notice the Black Zinc Chromate plated HR springs are taller. You will remove the silver springs and install the taller ones. |