Changes to Step #1
Edit by David Cordell —
Edit approved by David Cordell
- Before
- After
- Unchanged
Step Lines
| + | [title] Spring Install |
|---|---|
| + | [* 1] Use these steps as a GENERAL guide to locate and install the K-Series Detent springs. |
| + | [* 1] The transmission pictured is a K20A2 trans case. The detent spring locations will be the same for the K20A/A2/A3 & Z1 case. The K24 & K20Z3 transmission cases are slightly different, but all are in a similar spot. |
| + | [* 10] You may need to remove the engine mount if you are doing this install while the transmission is still in the car. Some installs, like the Acura TSX CL7/CL9 can be accomplished without removing the mount. |
Image 1
No previous image
Added
Image 2
No previous image
Added