Changes to Step #15
Edit by David Cordell —
Edit approved by David Cordell
- Before
- After
- Unchanged
Step Lines
| + | [title] Changing the shifter spring |
|---|---|
| + | [* 9] Tighten the screws down in a cross pattern. Make sure the spring does not get sandwiched between the lip of he aluminum housing. If it does, you won't be able to fully tighten the base. |
| + | [* 1] Once the spring is in place and the bolts are tightened confirm there is no gap between the housing and the base. |
| + | [* 10] Torque all 4 bolts to 6ft-lbs in a cross pattern. |
| + | [* 1] Enjoy your softer spring! |