Changes to Step #13

Edit by David Cordell —

Edit approved by David Cordell

Before
After
Unchanged

Step Lines

[title] Changing the shifter spring
-[* 9] The Hybrid Racing shifter comes pre-assembled with the SH (SUPER HARD) spring. This spring offers a snappy return however requires more force to move. If you fell this is TOO hard and would like to change to the H (HARD) Spring (included with the shifter) follow these steps.
+[* 9] The Hybrid Racing shifter comes pre-assembled with the SH (SUPER HARD) spring. This spring offers a snappy return however requires more force to move. If you feel this is TOO hard and would like to change to the H (HARD) Spring (included with the shifter) follow these steps.
[* 10] If you are happy with the feel and function, enjoy your shifter and do not continue.
-[* 1] Begin my locating the four mounting bolts. These these bolts hold the aluminum shifter section to the steel frame.
+[* 1] Begin by locating the four mounting bolts. These these bolts hold the aluminum shifter section to the steel frame.
[* 1] Use a 4MM Allen and remove the mounting bolts in a cross pattern. Loosen each bolt a little at a time.
[* 9] The entire assembly is under pressure so take your time removing the bolts. A little at a time until they are all loose. Be prepared to hold the housing as the spring can pop suddenly.