Changes to Step #15
Edit by David Cordell —
Edit approved by David Cordell
- Before
- After
- Unchanged
Step Lines
| - | [* 1] Insert wisdom here. |
|---|---|
| + | [title] Shifter Cable Installation |
| + | [* 1] Install the RH side shifter cable end link onto the Hybrid Racing shifter. Simple place the clip on the cable and push it into the ball. It should slide on and clip into place. |
| + | [* 1] Make sure the ball on the shifter assembly is straight. |
| + | [* 1] Install the RH side shifter cable endlink using the supplied retaining clip. |
| + | [* 1] Install the factory wiring harness to the shifter base. |