Changes to Step #14
Edit by David Cordell —
Edit approved by David Cordell
- Before
- After
- Unchanged
Step Lines
| + | [title] Shifter Cable Installation |
|---|---|
| + | [* 1] Twist the shifter cable so it slides into the shifter base. Once it is in, rotate it back to lock it into place. Be sure the cable cannot slide out. |
| + | [* 1] Install the RH side cable and use the OE retaining C clip. You can tap it down into place. |
Image 1
No previous image
Added
Image 2
No previous image
Added
Image 3
No previous image
Added