Changes to Step #11
Edit by David Cordell —
Edit approved by David Cordell
- Before
- After
- Unchanged
Step Lines
+ | [title] Shifter Installation |
---|---|
[* 1] You can use a 5MM Allen wrench to adjust the shifter to your desired settings. | |
[* 1] The shift knob can be raised or lowered to suit your driving position, be sure that these bolts are extremely tight to prevent unwanted movement. No thread locker is necessary. | |
[* 9] When adjusting, be sure to cycle through all gears and make sure the shift rod does not interfere with the movement. Adjust as necessary so nothing hits. |