Changes to Step #11
Edit by David Cordell —
Edit approved by David Cordell
- Before
- After
- Unchanged
Step Lines
| - | [* 1] Insert wisdom here. |
|---|---|
| + | [* 1] You can use a 5MM Allen wrench to adjust the shifter to your desired settings. |
| + | [* 1] The shift knob can be raised or lowered to suit your driving position, be sure that these bolts are extremely tight to prevent unwanted movement. No thread locker is necessary. |
| + | [* 9] When adjusting, be sure to cycle through all gears and make sure the shift rod does not interfere with the movement. Adjust as necessary so nothing hits. |